18 subminiature eseries stainless steel spring thermoplastic actuating button thermoplastic case silver contacts or gold crosspoint contacts common terminal nc terminal no terminal copper alloy blade features 4 current ratings choice of actuator 5 terminal types 3 contact arrangements long life coil spring mechanism dc ratings available upon request high-temperature version available subminiature modules take less space than individual subminiature switches fastened side-by-side. for applications requiring 2, 3, 4 or 5-circuit control in a compact space, the special molded case design helps speed assembly since there is only one part to handle and install rather than 2, 3, 4 or 5 individual switches. specifications electrical temperature rating: -40 to +85 c, +130 optional using thermoset material flammability rating: ul94hb materials case: thermoplastic actuating button: thermoplastic acetal terminals: silver-plated commercial bronze moving blade: beryllium copper spring: stainless steel auxiliary actuator: cold rolled steel (nickel-plated) contacts: fine silver (except e63 ?gold crosspoint) electrical ratings electrical life at rated load switch according to vde according to ul series en61058 rating ul1054 rating (min. operations) (min. operations) e61 n/a 5a, 125/250vac n/a 6,000* 5a, 30vdc (optional) e62 n/a 10.1a, 125/250vac; 1/4hp, 125vac n/a 6,000 e63 n/a 0.1a, 125vac n/a 6,000 0.25a, 30vdc (optional) e64 n/a 13a, 125vac; 10.1a, 250vac n/a 6,000 *indicates 100k life available.
19 0.781 (19.84) 0.250 (6.35) 0.093 (2.36) 0.093 (2.36) 0.300 (7.62) 0.375 (9.53) 0.352 (8.94) 0.093 (2.36) 0.087 ( 2.21 ) 0.095 (2.41) 0.405 (10.29) 0.073 (1.85) 0.237 (6.02) reference line 0.087 ( 2.21 ) 0.095 (2.41) dia. hole 0.094 ( 2.39 ) 0.109 (2.77) 0.375 (9.53 0.005 0.13) + - + - com n.o. n.c. nominal operate position 0.143 (3.63) 0.093 (2.36) 0.110 (2.79) 0.073 (1.85) 0.032 (0.81) 0.051 (1.30) 0.177 (4.50) 0.160 (4.06) 0.191 (4.85) 0.344 (8.74) 0.250 (6.35) 0.125 (3.18) 0.058 (1.47) 0.050 (1.27) short solder qc qc barrel pcb 10a 00a 30a 40a 50a i.d. with clinch opening terminals dimensions inches (mm) 0.483 (12.268) reference line actuation length 0.133 (3.378) standard actuator width 0.125 (3.175) 0.066 (1.676) c l of actuating button standard ratio high ratio actuators many special forms and lengths of actuators are available. standard type integral hinged lever and roller actuators are available in choice of 2 pivot positions. actuation lengths are dimensioned from centerline of switch mounting hole as shown. ordering information select the current rating you need. combine the corresponding series/prefix number with the appropriate suffix number for the switch type, circuitry and terminals you require. see additional note under terminals. example: to order the e61-50r with 0.110 (2.79mm) qc terminals, order an e61-80r. note: 0.093 (2.36mm) quick connect terminals are standard. to order solder terminals add 10 to suffix. to order 0.110 (2.79mm) qc terminals add 30 to suffix. for pcb terminals consult factory. example: the basic e61-00a becomes e61-30a for 0.110 (2.79mm) qc terminals. for pcb terminals consult factory for part numbers. actuator specifications maximum maximum operating minimum max. movement actuation operating force (gms.) pre-travel point* over-travel differential length** actuator switch inches inches inches inches inches type type e61 e62 e63 e64 (mm) (mm) (mm) (mm) (mm) 00a 90 212 90 335 0.030 0.3300.015 0.040 0.004 (0.76) (8.380.38) (1.06) (0.10) 00r 30 65 30 110 0.130 0.5740.054 0.030 0.020 0.196 (3.30) (14.581.37) (0.76) (0.51) (4.98) 50r 10 22 10 40 0.379 0.5700.156 0.050 0.050 0.322 (9.63) (14.483.96) (1.27) (1.27) (8.18) 00h 27 56 27 100 0.144 0.3500.030 0.040 0.020 0.271 (3.66) (8.890.76) (1.02) (0.51) (6.88) 50h 9 20 9 35 0.416 0.3500.175 0.050 0.050 0.396 (10.57) (8.894.45) (1.27) (1.27) (10.06) 00k 30 65 30 110 0.131 0.5700.030 0.030 0.020 0.203 (3.33) (14.480.76) (0.76) (0.51) (5.16) 50k 10 33 10 40 0.379 0.5700.158 0.040 0.050 0.326 (9.63) (14.484.01) (1.02) (1.27) (8.28) *measured above reference line. refer to dimensional drawing above. **actuator tolerance of 0.031 inches (0.79mm). specifications subject to change without notice. pcb footprint 0.405 (10.29) 0.197 (5.00) pcb terminals lateral to case or cover nc no c 0.063 (1.60) ( 3 ) 0.237 (6.02) pcb terminals straight down only circuitry contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. in general, normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02. example: e61-01a is normally open, and e61-02a is normally closed. mounting recommended mounting screw: #2-56 round head. recommended torque on screw: 2 inch lbs. max. terminals subminiature series is available with quick connect. 0.093 (2.36mm) wide (mates with amp part no. 60432-1) and 0.110 (2.794mm) wide (mates with amp part no. 42068-1). also available in short solder terminal 0.143 (3.63mm) wide x 0.125 (3.18mm) long, and pcb terminal 0.051 (1.30mm) wide x 0.191 (4.85mm) long. terminal spdt spst no spst nc 0.093 qc e61-00a e61-01a e61-02a short solder ? e61-10a e61-11a e61-12a 0.110 qc e61-30a e61-31a e61-32a barrel ? e61-40a e61-41a e61-42a pcb ? e61-50a e61-51a e61-52a ? not available on e64 series.
20 0.093 (2.36) 0.250 (6.35) dimension a 0.781 (19.84) 0.200 (5.08) 0.237 (6.02) 0.405 (10.29) 0.103 (2.62) 0.020 (0.51) (3 places) 0.094 (2.39) 0.109 (2.77) 0.483 (12.27) 0.093 (2.36) 0.087 (2.21) 0.095 (2.41) reference line 0.087 (2.21) dia 0.095 (2.41) hole 0.375 (9.53 0.005 0.13) + - + - com n.o. n.c. 0.143 (3.63) 0.093 (2.36) 0.110 (2.80) 0.051 (1.30) 10a* 00a 30a 50a* 0.160 (4.06) 0.191 (4.85) 0.344 (8.74) 0.250 (6.35) 0.125 (3.18) 0.058 (1.47) 0.050 (1.27) short solder qc qc pcb 2 pdt 0.470 0.020 (11.934 0.51) 3 pdt 0.672 0.020 (17.07 0.51) 4 pdt 0.875 0.020 (22.23 0.51) 5 pdt 1.086 0.020 (27.58 0.51) a dimension terminals *not available on e64 series part number suffix switch type terminal 2pdt 3pdt 4pdt 5pdt 0.093 (2.362mm) qc 02hm 03hm 04hm 05hm solder 12hm 13hm 14hm 15hm 0.110 (2.794mm) qc 32hm 33hm 34hm 35hm standard ratio pcb consult factory 0.093 (2.362mm) qc 52hm 53hm 54hm 55hm solder 62hm 63hm 64hm 65hm 0.110 (2.794mm) qc 82hm 83hm 84hm 85hm high ratio pcb consult factory dimensions modules inches (mm) specifications subject to change without notice. ordering information modules select the current rating you need. combine the corresponding series/prefix number with the appropriate suffix number for the switch type and terminals you require. *for additional actuator styles consult factory. 0.483 (12.268) reference line actuation length 0.133 (3.378) standard actuator width 0.125 (3.175) 0.066 (1.676) c l of actuating button standard ratio high ratio actuators modules many special forms and lengths of actuators are available. standard type integral hinged lever and roller actuators are available in choice of 2 pivot positions. actuation lengths are dimensioned from centerline of switch mounting hole as shown. pcb footprint modules 0.405 (10.29) 0.197 (5.00) pcb terminals lateral to case or cover nc no c 0.063 (1.60) ( 3 ) 0.237 (6.02) pcb terminals straight down only terminals modules subminiature modules are available with quick connect. 0.093 (2.362mm) wide (mates with amp part no. 60432-1) and 0.110 (2.794mm) wide (mates with amp part no. 42068-1). also available in short solder terminal 0.143 (3.632mm) wide x 0.125 (3.175mm) long, and pcb terminal 0.051 (1.295mm) wide x 0.191 (4.851mm) long.
|
